Cobra PRO 7080 Instructions d'exploitation télécharger pdf (Page 4)

Nothing Comes Close to a Cobra

Installation

Your Detector

Installation

Your Detector

English

Installation

•

Where to Mount Your Unit

You will get optimum performance from your detector if you Mount it at a

point approximately in the center of the vehicle, as low as possible on the front

windshield without obstructing the unit’s view of the road either to

the front or rear. You can also mount it directly on the dashboard.

The unit’s lens must not be blocked and the LaserEye should have a clear view out

the back window to allow 360° detection.

Radar and laser signals pass through glass but not through other materials and

objects. Objects that can block or weaken incoming signals include:

Windshield wiper blades

Mirrored sun screens

Dark tinting at the top of the windshield

Heated windshields currently available on some vehicles

(Instaclear for Ford, Electriclear for GM). Consult your dealer

to see if you have this option.

Windshield Mounting

The LaserEye Should Have a Clear View

Windshield Mounting Dashboard Mounting

1. Attach the rubber

cups to the bracket.

2. Make sure the rubber cups and your windshield are clean.

3. Push the bracket firmly onto

the windshield.

4. Attach the detector to

the bracket. Check the

angle of the unit.

5. To adjust the angle if

necessary, gently push or pull

on the bracket to bend it. DO

NOT use the detector to bend

the bracket.

6. Plug the power cord

into the detector.

7. Plug the cigarette lighter

adapter on the power

cord into your vehicle’s

cigarette lighter.

8. You can temporarily remove the detector whenever you

wish by pressing the bracket release button and sliding

it off the bracket.

XRS9770PRO_MANL.indd 2-3 3/20/14 9:42 AM

1 2 3 4 5 6 7 8 9 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Cobra PRO 7080 Instructions d'exploitation Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Détecteurs radar Cobra PRO 7080