Cobra SPX 5500 Manuel d'utilisateur télécharger pdf (Page 140)

Management and Configuration

140 AXIS 5570e / AXIS 5670e User’s Manual

Using SNMP

You can use SNMP (Simple Network Management Protocol) for remotely

monitoring and configuring of the Axis Network Print Server. All major

functions for print servers are supported.

General Information SNMP refers to a set of standards for network management, including a

protocol, a database structure specification, and a set of data objects. The

Axis Network Print Server SNMP implementation runs in the TCP/IP

environment.

The management is handled by NMS (Network Management System)

software running on a host on your network. The NMS software

communicates with network devices by the means of messages, which are

references to one or more objects.

A message can be a question or an instruction to a device, or an alarm

triggered by a specific event in a device. Objects are contained in data

bases called MIBs (Management Information Base), where MIB-II is a

standard database.

The Axis Network Print Server supports all relevant parts of MIB-II and

also includes a private enterprise MIB. Refer to The AXIS MIB, on page

140.

System Requirements

for SNMP

The following requirements must be fulfilled in order to make full use of

the Axis Network Print Server SNMP support:

• NMS software that allows you to install private enterprise MIBs

• A host, supporting FTP, on which to run the NMS software

Follow these steps to add the AXIS MIB to your NMS software:

1. Log in to the Axis Network Print Server using FTP.

2. Download the MIB file /snmp/axis.mib to the NMS host.

3. Install the AXIS MIB according to instructions in your NMS software

documentation.

The AXIS MIB The AXIS MIB contains a large number of objects which may be

categorized as follows:

• Menu objects - used for viewing and changing the Axis Network Print

Server configuration from the NMS program. Refer to

The Parameter

List

, on page 216.

• Printer status and unit administration objects - used for monitoring

Axis Network Print Server print jobs and storing parameter changes

permanently.

• Trap objects - used for alarms at various error conditions.

For technical details, you can view the MIB file (axis.mib) with any text

editor.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 281 282

Commentaires sur ces manuels

Pas de commentaire

Cobra SPX 5500 Manuel d'utilisateur Page 140

Commentaires sur ces manuels