Cobra SPX 5500 Manuel d'utilisateur télécharger pdf (Page 174)

SNA Parameter Overview

174 AXIS 5570e / AXIS 5670e User’s Manual

Updating parameters

This is most easily done from the internal Web pages of your Axis

Network Print Server. To set the parameters using a Web browser, you

first need to assign an IP address to the Axis Network Print Server. For

instructions on how to do this, refer to “Setting the IP Address” on page

16.

Alternatively, you can update the parameters via FTP, TFTP or by using

extended IBM printer emulation.

Using extended IBM printer emulation means setting up the Axis Network

Print Server by printing a file containing extended IBM emulation

commands to it after you have established communication with your IBM

host. The configuration is started by inserting the sequence

%CONFIG+ in

your text. To protect your settings, a password must be provided. By

default, the password is

pass. You may then set the parameter values

directly using the syntax shown below:

Syntax:

When all parameters have been set the

SAVE command saves the settings

permanently. The

%CONFIG- command resumes normal printing. In order

to maintain backward compatibility, some parameters must be preceded

by a

%CONFIG++ command. See also The Parameter List, on page 216.

To set the parameters to their default values, enter the following in your

document and print it.

Description - Axxxxxxx, where "xxxxxxx" is the last 7 characters of the Axis Network Print Server

serial number, in reverse order, e.g.

if s.no. =

00 40 8C 1B 06 D4 the default LU Name =

A4D60B1C.

This will be the name of the APPC device and controller

created during auto-configuration

CP_NAME

(AXIS 570 only)

Control Point Name Axxxxxxx 5494 only

Description - Axxxxxxx, where "xxxxxxx" is the last seven characters of the Print Server serial

number, in reverse order, i.e. a print server with serial number 00 40 8C 1B 06 D4 will have the

default CP Name A4D60B1C. This will be the name of the APPC controller created during auto-

configuration.

H1_NW_NAME Host Network Name APPN 5494 only.

H1_LU_NAME Host LU Name

DEFAULT

5494 only

Parameter Name Default Emulation

<Parameter name> = <value> [, <value>];

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 281 282

Commentaires sur ces manuels

Pas de commentaire

Cobra SPX 5500 Manuel d'utilisateur Page 174

Commentaires sur ces manuels