Cobra SPX 5500 Manuel d'utilisateur télécharger pdf (Page 171)

Upgrading the Firmware

AXIS 5570e / AXIS 5670e User’s Manual 171

1. From www.axis.com, download the firmware and save it to a new

directory on your computer, e.g. c:\Axis (if the directory does not exist,

create it).

2. Open a command prompt from Start => Run. The Run window will appear.

Type cmd and click OK. (Windows 98: Type command and click OK.) The DOS

Command Prompt window will open.

3. Make sure you are working from the correct directory:

type cd c:\Axis and press Enter.

4. Connect to the print server using ftp:

type ftp 10.13.4.105 followed by Enter.

(Example using print server IP address 10.13.4.105)

5. Enter the user name, the default user is root. Press Enter. If the default

password has been changed then it must also be entered. When you enter

the password, it will not be echoed to the screen, nor will the cursor move.

6. Change to binary mode transfer.

Type bin hash (or binary hash) and press Enter.

7. Use the put command to upload the upgrade file to the flash location:

(Example using firmware named 5570e_v2_7_00.bin):

Type put 5570e_v2_7_00.bin FLASH followed by Enter. (Note that FLASH

is written in capital letters!) A stream of hash (#) marks will appear.

Wait 30 seconds... You will receive a message stating Transfer complete.

Flash programming finished OK. The print server will restart in five seconds

running the new software.

When you see a new ftp prompt the procedure has been completed

successfully.

8. Type bye followed by Enter to end the ftp session.

Obtaining the Software

You can obtain all the print server firmware as well as the latest utility

software from the following locations:

• http://www.axis.com

• your local dealer

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 281 282

Pas de commentaire

Cobra SPX 5500 Manuel d'utilisateur Page 171