Cobra SPX 5500 Manuel d'utilisateur télécharger pdf (Page 36)

Setting Up - IBM Mainframe (zSeries)

36 AXIS 5570e / AXIS 5670e User’s Manual

Section 5 Setting Up - IBM Mainframe (zSeries)

This section describes how to configure the Axis Network Print Server for

printing SCS, 3270 and IPDS data streams using SNA and TCP/IP

transport protocols in the IBM Mainframe (zSeries) environment.

Proceed to the setup section that is relevant to your network

environment, as described in the table below:

Notes:

If you intend to operate your Axis Network Print Server in a multi-

protocol environment, you should also proceed to the other relevant

sections in this manual.

SNA Printing

The Axis Network Print Server supports printing of SCS, 3270 and IPDS

data streams via the SNA transport protocol.

Important:

Configuring for SNA printing in 3174 CU Mode is described in three

separate stages:

• Configuring the IBM Mainframe Host system

• Configuring the Axis Network Print Server

• Verifying the communication

Printing protocol Data streams Action

SNA

SCS

SNA Printing

, on page 363270DS

IPDS

TN3270E (TCP/IP)

SCS

TCP/IP TN3270E Printing

, on page 423270DS

IPDS

PPR/PPD (TCP/IP) IPDS

PPR/PPD Printing - IPDS data streams

, on page 50

• IPDS is only available for print server models with the IPDS option installed.

• SNA is only available for print server models with the SNA option installed.

Please refer to “Protocols and Datastreams” on page 9.

The Axis Network Print Server must be set up to emulate an IBM 3174 (3174 CU mode) in the

Mainframe/VTAM environment.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 281 282

Pas de commentaire

Cobra SPX 5500 Manuel d'utilisateur Page 36