Cobra SPX 5500 Manuel d'utilisateur télécharger pdf (Page 42)

Setting Up - IBM Mainframe (zSeries)

42 AXIS 5570e / AXIS 5670e User’s Manual

Note for IPDS printing:

Verifying the

Communication Link

The easiest way to test the communication is by sending a print job to the

Axis Network Print Server. If there are problems, press the test button

once to print the test page where you can find the present SNA link

status.

Procedures 1. Power on the Print Server and wait for 2 minutes.

2. Press the test button once to print a test page and make sure that the SNA

status line is defined as either:

•Idle

•Actv

•LU-1

•LU-3

Note:

The Axis Network Print Server is now ready for use in the SNA

environment.

TCP/IP TN3270E Printing

The following procedures describe how to configure the Axis Network

Print Server for SCS, 3270DS and IPDS printing, using TCP/IP TN3270E.

This is achieved by establishing communication between the Axis

Network Print Server and Mainframe host via a TN3270E server, using the

TCP/IP transport protocol for the SCS, 3270 and IPDS data streams, as

illustrated below:

In the Configuration Wizard, you can choose between PCL or PostScript printing. Choose the

printer language that corresponds to your printer.

Please refer to the Parameter List and FAQ on the Axis Web site, if the status line indicates

that the SNA link is not active.

IPDS is only available for print server models with the IPDS option installed. Please refer to

“Protocols and Datastreams” on page 9



Print server

XIS

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 281 282

Pas de commentaire

Cobra SPX 5500 Manuel d'utilisateur Page 42